Timber Piles for Foundations

Timber piles are utilized broadly for compaction of soils and for supporting and ensuring waterfront structures. The decision of utilization of timber piles is chiefly represented by the site conditions, especially water table conditions.

Timber piles are similarly light for their quality and are handily dealt with. Nonetheless, they can't withstand hard-driving as concrete or steel piles can. Hence, timber must be chosen and rewarded cautiously as toughness and execution rely on the nature of the material and nonappearance of normal imperfections.

Classes of Timber Piles: In view of the idea of utilization, piles are named Class-A and Class-B.

Class-A: The Class-A piles are utilized for railroad and roadway spans, trestles, docks, and distribution centers. The butt distance across or sides of the square will not be under 30cm.

Class-B: The Class-B piles are utilized for establishment work other than determined in Class-An and brief work. Piles utilized for compaction of ground will not be under 100mm in distance across or side in square piles.

Timber Piles Specifications: The length of the individual pile will be determined to be ±30cm for long and ± 60cm for lengths above 12m. On account of round piles, the proportion of heartwood distance across to the pile butt measurement will not be under 0.8. Both the finishes will be sawn at right edges to the length of the pile, and the bunches and appendages will be cut to make the surface.

Driving Timber Piles into Ground: The piles in each bowed of a pile will be chosen for consistency in size to encourage the setting of propping individuals. The pile tip will be pointed (except if driving in completely delicate layers) as a shortened cone or a pyramid having the end 25 cm2 to 40 cm2 in region, and the length will be 1 ½ to multiple times the width or side of a square.

In the event that the driving is to be done in a hard material, for example, hardened mud, rock, and so on., metal shoes of affirmed configuration will be connected to the tip. The top of the pile ought to be hooped with an appropriate ring or wrapped with wires to forestall parting and diminish brooming. The heads of piles will be additionally secured by the arrangement of pad squares.

~~~~~~~~~~~~~~~~~~~~~~~~~~

Published By

Rajib Dey

www.constructioncost.co

~~~~~~~~~~~~~~~~~~~~~~~~~~