Categories

Saturday, October 6, 2018

Common types of walls found in construction

The following types of walls are generally found in building construction.

Types of Walls:
Load Bearing Walls - Precast Concrete Wall, Retaining Wall, Masonry Wall, Pre Panelized Load Bearing Metal Stud Walls, Engineering Brick Wall, Stone Wall


Non-Load Bearing Wall - Hollow Concrete Block, Facade Bricks, Hollow Bricks, Brick Walls, Cavity Walls, Shear Walls, Partition Walls, Panel Walls, Veneered Walls, Faced Walls.

Given below, the details of these walls.

Load Bearing Walls: Load bearing wall belongs to a structural component. It bears the weight of a house from the roof and upper floors and transmits the weight to the foundation. It provides support to the structural members like beams, slab and walls situated over floors. A wall that is situated directly over the beam is known as load bearing wall. The purpose of load bearing wall is to bear the vertical load. On contrary, if a wall doesn’t contain any walls, posts or other supports directly over it, it is prone to be a load-bearing wall.

Load bearing walls also bear their self weight. This wall is normally situated over one another on each floor. Load bearing walls are utilized as interior or exterior wall. This type of wall will often be perpendicular to floor joists or ridge. Concrete is a useful material to support these loads. The beams enter directly into the concrete foundation. Load bearing walls inside the house is likely to run the equivalent direction as the ridge.

Various types of load bearing walls:
Precast Concrete Wall, Retaining Wall, Masonry Wall, Pre Panelized Load Bearing Metal Stud Walls, Engineering Brick Wall, Stone Wall.


Non-Load Bearing Walls: Non-load bearing wall means a wall that doesn’t allow the structure to stand up and retain itself. It doesn’t deal with floor roof loads over. It is a framed structure. Normally, these belong to interior walls whose purpose is to separate the structure into rooms. They are constructed lighter.

The non-load bearing walls can be eliminated devoid of risking the safety of the building. Non-load bearing walls are recognized with the joists and rafters. They are not intended for gravitational support for the property. This type of wall is inexpensive. This wall is also known as “curtain wall”.

Types of Non-Load Bearing Wall:
Hollow Concrete Block, Facade Bricks, Hollow Bricks, Brick Walls


Cavity Walls: The cavity wall comprises of two individual withes which are formed with masonry. These two walls are called as internal leaf and external leaf. This wall is also called as a hollow wall. The purpose of these walls is to minimize their weights on the foundation. The walls function as good as sound insulation. Cavity wall offers superior thermal insulation as compared to any other solid wall since the space is completely filled with air and lessens heat circulation. They contain a heat flow rate that is 50 percent that of a solid wall. It is very cost-effective as compared to other solid walls. It has good fire resistance capacity. Cavity wall facilitates to get rid of noise.

Shear Walls: It stands for a framed wall. The prime objective of the wall is to withstand lateral forces which generate from the exterior walls, floor, and roofs to ground foundation. The shear wall is effective for large and high-rise buildings. The main ingredients of this wall are concrete or masonry. It contains a sound structural system to withstand earthquake. It offers stiffness in the direction. The construction and application are easy in shear walls. It is situated uniformly to minimize adverse effects of a twist.

Partition Walls: It is suitable for segregating spaces from buildings. The wall is hard and made of brick or stone. It is a framed construction. The partition wall is attached with the floor, ceiling, and walls. It has good strength to bear its own load. It defends against impact. It is durable and strong to support wall fixtures. Partition wall functions as a sound barrier and it has good resistance capacity against fire.

Panel Walls: It is a non-bearing wall among columns or pillars that are supported. The panel is set up with both nails and adhesive. The paneling design choices comprise of rustic, boards, frame. Paneling is done with hardwoods or inexpensive pine. Prior to set up panel walls, the space should be painted.

Veneered Walls: The material is retained through a veneered wall. The brick or stone are main ingredients of the veneered walls. The wall is only one wythe thick. It became the norm when insulation is necessary in the interior walls for building codes. It is light weighted. Less time is required for building up the veneered walls.

Faced Walls: It is a wall where masonry facing and backing are attached to make use of common action under load. The installation process is very simple.

Common types of walls found in construction

Read more

~~~~~~~~~~~~~~~~~~~~~~~~
Published By
Rajib Dey
www.constructioncost.co
~~~~~~~~~~~~~~~~~~~~~~~~

No comments:

Post a Comment