If cement is blended with sand, stone/aggregates and water, a paste will be developed and it can be applied to stick the building materials collectively. This paste is known as concrete.
The ration upon which the cement, sand, stones or aggregates are amalgamated, defines the strength of the concrete mix. Depending on these ratios, different types of concrete grades are accessible in the market. These concrete grades range from M10, M20, M30, M35, etc.
The ration upon which the cement, sand, stones or aggregates are amalgamated, defines the strength of the concrete mix. Depending on these ratios, different types of concrete grades are accessible in the market. These concrete grades range from M10, M20, M30, M35, etc.
“M” denotes “mix”. Mix characterizes concrete with indicated ratios of cement, sand and aggregate. And the number after “M” denotes compressive strength of that concrete mix in N/mm2 after 28 days. As for instance, for M30 grade of concrete mix, its compressive strength after 28 days should have been 30 N/mm2.
Concrete mix ratio table
Given below, the standard chart table that displays different grades of concrete mix design together with their relevant ratios of cement, sand and aggregates required.
It is found that volume of sand is always retained half of that of aggregates in these standard mix designs. These proportions can be estimated and sustained with buckets or some other standard cubes which are easily utilized during the project. It is essential to keep up uniformity in each and every concrete mix produced throughout the entire project.
The site engineer/supervisor should take the responsibility to examine and implement it.
Water content ratio in concrete mix: The strength & adaptability of concrete is mainly dependent on water content. The adaptability of concrete (more fluid) will be increased with the higher quantity of water but it will decrease the concrete strength.
Contrarily, if the amount of water is low, adaptability of water will also be decreased. So, it becomes complicated to arrange such concrete in the structure. Required amount of water may differ for same volume of concrete for different grades of concrete. So, equilibrium should be maintained in the construction site throughout concrete mixing.
Video Source: Civil Engineering
~~~~~~~~~~~~~~~~~~~~~~~~~
Published By
Rajib Dey
www.constructioncost.co
~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~
Published By
Rajib Dey
www.constructioncost.co
~~~~~~~~~~~~~~~~~~~~~~~~~
No comments:
Post a Comment